MaxStream 9XTend-PKG-E Manual descargar pdf (Pagina 35)

9XTend‐PKG‐R™RS‐232/485RFModem–ProductManualv1.2.4

©2005MaxStream,Inc.ConfidentialandProprietary 35

RT (GPI1 Configuration) Command

AT Command: ATRT

Binary Command: 0x16 (22 decimal)

Parameter Range: 0 – 2

Parameter

Value

Configuration

0 disabled

Enable Binary

Programming

2 Enable

Flow Control

Default Parameter Value: 0

Number of bytes returned: 1

RT Command is used to set/read the behavior of

the GPI1 pin. The pin can be configured to enable

binary programming or

flow control.

SB (Stop Bits) Command

AT Command: ATSB

Binary Command: 0x37 (55 decimal)

Parameter Range: 0 – 1

Parameter

Value

Configuration

0 1 stop bit

1 2 stop bits

Default Parameter Value: 0

Number of bytes returned: 1

<Serial Interfacing> SB Command is used to

set/read the number of stop bits in the data

packets.

SH (Serial Number High) Command

AT Command: ATSH

Binary Command: 0x25 (37 decimal)

Parameter Range (read-only): 0 – 0xFFFF

Number of bytes returned: 2

Related Commands: SL (Serial Number Low)

<Diagnostics> SH Command is used to set/read

the serial number high word of the modem.

SL (Serial Number Low) Command

AT Command: ATSL

Binary Command: 0x26 (38 decimal)

Parameter Range (read-only): 0 – 0xFFFF

Number of bytes returned: 2

Related Commands: SH (Serial Number High)

<Diagnostics> SL Command is used to set/read

the serial number low word of the modem.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 54 55

Comentarios a estos manuales

Sin comentarios

MaxStream 9XTend-PKG-E Manual Pagina 35

Comentarios a estos manuales