MaxStream 9XTend-PKG-E Manual descargar pdf (Pagina 34)

9XTend‐PKG‐E™EthernetRFModem–ProductManualv2.x4x[2007.01.04]

©2007MaxStream,Inc.,Confidential&Proprietary‐AllRightsReserved 34

PK (Maximum RF Packet Size) Command

<RF Interfacing> The PK command is used to set/

read the maximum size of RF packets transmitted

from an RF modem. The maximum packet size

can be used along with the RB and RO parameters

to implicitly set the channel dwell time.

If PK is set above 256 and BR is subsequently

changed to 0, PK will automatically be lowered to

256 and a warning will be raised (refer to the BR

(RF Data Rate) and WN (Warning Data) com-

mands for details).

Changes to the PK parameter may have a second-

ary effect on the RB (Packetization Threshold) parameter. RB must always be less than or equal to

PK. If PK is changed to a value that is less than the current value of RB, the RB value is automati-

cally lowered to be equal to PK.

* When BR = 0 (9600 baud), the maximum PK value is 0x100 (256d). When BR = 1 (115,200

baud), the maximum PK value is 0x800 (2048d).

PL (TX Power Level) Command

<RF Interfacing> The PL command is used to set/

read the power level at which the RF modem

transmits data.

PW (Pin Wake-up) Command

<Sleep (Low Power)> Under normal operation, an

RF modem in Cyclic Sleep Mode cycles from an

active state to a low-power state at regular inter-

vals until data is ready to be received. If the PW

parameter is set to 1, the SLEEP pin (GPI2) can

be used to awaken the modem from Cyclic Sleep.

When the SLEEP Pin is de-asserted (low), the

modem will be fully operational and will not go

into Cyclic Sleep.

Once the SLEEP pin is asserted, the modem will

remain active for the period of time specified by

the ST (Time before Sleep) parameter and will

return to Cyclic Sleep Mode (if no data is ready to

be transmitted). PW Command is only valid if Cyclic Sleep has been enabled.

AT Command: ATPK

Binary Command: 0x29 (41 decimal)

Parameter Range: 1 - 0x800 [Bytes]

Default Parameter Value:0x100* or 0x800*

(256 or 2048 decimal)

Number of bytes returned: 2

Related Commands: BR (RF Data Rate) RB

(Packetization Threshold), RO (Packetization

Timeout), WN (Warning Data)

AT Command: ATPL

Binary Command: 0x3A (58 decimal)

Parameter Range: 0 - 4

Parameter Configuration

01 mW

110 mW

2 100 mW

3 500 mW

4 1000 mW (1 Watt)

Default Parameter Value: 4

Number of bytes returned: 1

AT Command: ATPW

Binary Command: 0x1D (29 decimal)

Parameter Range: 0 - 1

Parameter Configuration

0 Disabled

1Enabled

Default Parameter Value: 0

Number of bytes returned: 1

Related Commands: SM (Sleep Mode), ST

(Time before Sleep)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Comentarios a estos manuales

Sin comentarios

Skc limited EPAM-5000 Manual de usuario (90 paginas)

Marca: Skc-limited | Categoria: Equipment | Tamaño: 3.42 MB |

Tabla de contenidos

USER’S GUIDE

SKC EPAM-5000

User’s Guide

Safety Notice

Warranty

Table of Contents

Chapter 1

Introduction

NIOSH, 1973

Ease of use

General

Information

Relative Optical

Response

Features

Specifications

Components

Chapter 2

Chapter Overview

Power-On

Power-Off

Using the Menu

Setting the Date and Time

Setting the Alarm

Clearing the Memory

Chapter 3

Operating the SKC EPAM-5000

Selecting The Particle Size

1.0um Dust Particulates

2.5um Dust Particulates

Selecting PM

Auto-Zero

Manual-Zero

Sampling

Sampling, Continued

Location Codes

Reviewing Stored Data

Spreadsheet

Data plots

Installing DustComm

Windows ME

Windows NT

2000 & XP

Menu Selections

File Menu Commands

Exit software

Downloading Data

Downloading Data, Continued

DustComm Pro Window

Location Data

Translating

Generating a Plot

Data Plot Menu Selections

Editing Title

Applying a Correction Factor

Chapter 5 - Maintenance

Chapter 5

Maintenance

When to check

Conditions

Checking

Calibration

Checking the Flow Rate

Adjusting the Flow Rate

Battery Maintenance

Recharging the

Cleaning the Impactors

Cleaning the Sensor Optics

Continued on next page

Chapter 6 - Troubleshooting

Chapter 6

Troubleshooting

If instrument

Appendix

Appendix A

Menu Screens

Appendix B

Appendix C

Glossary of Terms

Appendix D

EPAM-5000 Accessories

Overview

Más productos y manuales para Equipo Skc-limited

Modelos	Tipo de documento
Chromic Acid Test Kit	Manual de usuario SKC Limited Chromic Acid Test Kit User Manual, 20 paginas

MaxStream 9XTend-PKG-E Manual Pagina 34

Comentarios a estos manuales

Skc-limited EPAM-5000 manuales

Skc limited EPAM-5000 Manual de usuario (90 paginas)

Tabla de contenidos

Más productos y manuales para Equipo Skc-limited

MaxStream 9XTend-PKG-E Manual Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Redes MaxStream 9XTend-PKG-E

Skc-limited EPAM-5000 manuales

Skc limited EPAM-5000 Manual de usuario (90 paginas)

Tabla de contenidos

Más productos y manuales para Equipo Skc-limited